BMP zu DXF konvertieren that actually cuts.
Kostenlos unten testen, wo Auto-Trace scheitert — dann liefert ein Mensch closed-path, kerf-aware DXF your laser or router runs without errors.
Kurzfassung
You can convert BMP to DXF free with our instant tracer — but auto-trace leaves gaps that laser or router can't run. For laser cutters, CNC routers and plasma tables, a human redraw delivers closed paths, single-line geometry, kerf compensation in 24 hours, guaranteed.
BMP has no paths. A cutter needs nothing but.
A BMP is raw, uncompressed pixels — usually a scan. There's no compression artifact, but the scan itself carries paper grain, dust and speckle that a tracer can't distinguish from the artwork, so it all comes through as stray marks.
Your laser or router can't run that. It needs closed paths (so the cut starts and ends), single lines (so it doesn't double-cut and scorch), and ideally a kerf offset sized to your beam or bit. We rebuild the geometry by hand to satisfy all three — then deliver native DXF plus SVG, layered per operation.
Upload your BMP
Any resolution — even a screenshot or a photo of a printed part.
We rebuild the paths
A human redraws closed, single contours and sets your kerf and tool offset.
Cut-ready DXF in 24h
You get native DXF plus SVG, layered per operation, guaranteed to cut clean.
Gleiches BMP. Zwei sehr unterschiedliche DXFs.
| Für laser or router | Manuelle Nachzeichnung · VectorWiz | Gratis Auto-Trace |
|---|---|---|
| Path closure | Closed contours | Open outlines |
| Line doubling | Single lines | Doubled edges |
| Kerf / tool offset | Offset to your machine | None |
| Node count | Minimal, editable | Hundreds of stray points |
Bevor Sie send it to the bed.
Can I convert BMP to DXF for free?
Yes — a free instant tracer does it in your browser. It works for simple, high-contrast art, but scanned BMPs carry paper noise and speckle that trace as stray marks, so for production a human redraw is usually needed.
Why won't an auto-traced DXF cut cleanly?
Because BMP is uncompressed pixels, and auto-trace turns that into stray nodes and broken geometry. Your laser or router needs closed paths, single-line geometry, kerf compensation. A human rebuild resolves all of it.
What do I get back?
Native DXF plus SVG, layered per operation — built to cut first try, with a 100% remake guarantee.
How fast is a human BMP to DXF redraw?
24 hours standard, with 12-hour rush available and a 100% remake guarantee if it isn't production-correct.
Wohin dieser Konverter verlinkt.
Oben · Säule & Hub
Seitlich · andere Konverter
Unten · Wissen
Get a DXF that runs first try.
Send the BMP, we'll rebuild it right and have a production-ready DXF back in 24 hours — guaranteed.