CDR zu DXF konvertieren that actually cuts.
Kostenlos unten testen, wo Auto-Trace scheitert — dann liefert ein Mensch closed-path, kerf-aware DXF your laser or router runs without errors.
Kurzfassung
You can convert CDR to DXF free with our instant tracer — but auto-trace leaves gaps that laser or router can't run. For laser cutters, CNC routers and plasma tables, a human redraw delivers closed paths, single-line geometry, kerf compensation in 24 hours, guaranteed.
CDR is messy. Your laser or router needs clean geometry.
A CDR is CorelDRAW's proprietary file, and its internals change with almost every release. Open an old one outside Corel and you get missing fonts, dropped effects, shifted colors, or a flat 'can't read this version' error. Even a clean import arrives with live lens and PowerClip objects, outline-vs-fill quirks, and texture fills that don't survive a naive export — so the file you hand a vendor isn't the file they can run.
Your laser or router can't run that. It needs closed paths (so the cut starts and ends), single lines (so it doesn't double-cut and scorch), and ideally a kerf offset sized to your beam or bit. We rebuild the geometry by hand to satisfy all three — then deliver native DXF plus SVG, layered per operation.
Upload your CDR
Any resolution — even a screenshot or a photo of a printed part.
We rebuild the paths
A human redraws closed, single contours and sets your kerf and tool offset.
Cut-ready DXF in 24h
You get native DXF plus SVG, layered per operation, guaranteed to cut clean.
Gleiches CDR. Zwei sehr unterschiedliche DXFs.
| Für laser or router | Manuelle Nachzeichnung · VectorWiz | Gratis Auto-Trace |
|---|---|---|
| Path closure | Closed contours | Open outlines |
| Line doubling | Single lines | Doubled edges |
| Kerf / tool offset | Offset to your machine | None |
| Node count | Minimal, editable | Hundreds of stray points |
Bevor Sie send it to the bed.
Can I convert CDR to DXF for free?
Yes — a free instant tracer does it in your browser. It works for simple, high-contrast art, but CDR is a closed Corel format that changes between versions, so anything but CorelDRAW opens it wrong — dropped effects, shifted colors, or no open at all, so for production a human redraw is usually needed.
Why won't an auto-traced DXF cut cleanly?
Because CDR is CorelDRAW's native artwork, and auto-trace turns that into stray nodes and broken geometry. Your laser or router needs closed paths, single-line geometry, kerf compensation. A human rebuild resolves all of it.
What do I get back?
Native DXF plus SVG, layered per operation — built to cut first try, with a 100% remake guarantee.
How fast is a human CDR to DXF redraw?
24 hours standard, with 12-hour rush available and a 100% remake guarantee if it isn't production-correct.
Wohin dieser Konverter verlinkt.
Oben · Säule & Hub
Seitlich · andere Konverter
Unten · Wissen
Get a DXF that runs first try.
Send the CDR, we'll rebuild it right and have a production-ready DXF back in 24 hours — guaranteed.