Convertire SVG in DXF that actually cuts.
Traccia gratis sotto per vedere dove l'auto-trace fallisce — poi un umano consegna closed-path, kerf-aware DXF your laser or router runs without errors.
Risposta breve
You can convert SVG to DXF free with our instant tracer — but auto-trace leaves gaps that laser or router can't run. For laser cutters, CNC routers and plasma tables, a human redraw delivers closed paths, single-line geometry, kerf compensation in 24 hours, guaranteed.
SVG is messy. Your laser or router needs clean geometry.
SVG is great for the web and messy for production. Exported from a design tool it's packed with redundant anchor points, nested transforms, groups and strokes-as-outlines — structure a browser ignores but a cutter or press has to be untangled from first.
Your laser or router can't run that. It needs closed paths (so the cut starts and ends), single lines (so it doesn't double-cut and scorch), and ideally a kerf offset sized to your beam or bit. We rebuild the geometry by hand to satisfy all three — then deliver native DXF plus SVG, layered per operation.
Upload your SVG
Any resolution — even a screenshot or a photo of a printed part.
We rebuild the paths
A human redraws closed, single contours and sets your kerf and tool offset.
Cut-ready DXF in 24h
You get native DXF plus SVG, layered per operation, guaranteed to cut clean.
Stesso SVG. Due DXF molto diversi.
| Per laser or router | Redraw manuale · VectorWiz | Auto-trace gratis |
|---|---|---|
| Path closure | Closed contours | Open outlines |
| Line doubling | Single lines | Doubled edges |
| Kerf / tool offset | Offset to your machine | None |
| Node count | Minimal, editable | Hundreds of stray points |
Prima di send it to the bed.
Can I convert SVG to DXF for free?
Yes — a free instant tracer does it in your browser. It works for simple, high-contrast art, but SVG from design tools is full of redundant nodes, nested transforms and groups a machine chokes on, so for production a human redraw is usually needed.
Why won't an auto-traced DXF cut cleanly?
Because SVG is web vector markup, and auto-trace turns that into stray nodes and broken geometry. Your laser or router needs closed paths, single-line geometry, kerf compensation. A human rebuild resolves all of it.
What do I get back?
Native DXF plus SVG, layered per operation — built to cut first try, with a 100% remake guarantee.
How fast is a human SVG to DXF redraw?
24 hours standard, with 12-hour rush available and a 100% remake guarantee if it isn't production-correct.
Dove collega questo convertitore .
Su · pilastro e hub
Laterale · altri convertitori
Giù · approfondire
Get a DXF that runs first try.
Send the SVG, we'll rebuild it right and have a production-ready DXF back in 24 hours — guaranteed.