Convertir JPG en DXF the right way.
Tracez gratuitement ci-dessous pour voir où l'auto-trace échoue — puis un humain livre a production-correct DXF your workflow can actually run.
Réponse courte
You can trace a JPG to DXF free with our instant tool — but JPEG noise produces open, doubled paths no machine can run. For engraving or cutting, a human rebuilds it into closed paths or single-line centerlines, kerf-aware and clean, in 24 hours.
A JPG is noise. A laser needs clean geometry.
A JPEG stores compressed pixels with soft, artifacted edges. Auto-trace follows them into open, doubled outlines with hundreds of stray nodes — and for engraving you usually want the opposite: a single-line centerline path the tool follows once.
We rebuild it by hand: closed contours for cutting or single-line centerlines for engraving, a kerf offset to your tool, and clean minimal-node geometry that runs smooth and fast.
Upload your JPG
Any resolution — even a photo of an engraved part.
We rebuild the geometry
A human draws closed or single-line paths and sets kerf.
Machine-ready DXF in 24h
Native DXF + SVG, depth-layer ready, guaranteed.
Même JPG. Deux DXF très différents.
| Pour laser or router | Redraw manuel · VectorWiz | Auto-trace gratuit |
|---|---|---|
| Path closure | Closed contours | Open outlines |
| Line doubling | Single lines | Doubled edges |
| Kerf / tool offset | Offset to your machine | None |
| Node count | Minimal, editable | Hundreds of stray points |
Avant de run the file.
Can I convert a JPG to DXF for free?
Yes — the tracer above does it free. It handles simple high-contrast shapes, but JPEG noise leaves open, doubled paths, so production cutting or engraving needs a human redraw.
Can you make single-line engraving paths?
Yes — we convert filled text and logos to single-line centerline paths so the tool follows the line, not the outline, with no double-pass waste.
Do you compensate for kerf?
Yes — we offset for your kerf and tool diameter so parts come off the bed at the intended dimension.
How fast is the redraw?
24 hours standard, 12-hour rush available, with a 100% remake guarantee.
Où mène ce convertisseur .
Haut · pilier et hub
Latéral · autres convertisseurs
Bas · apprendre
Get a DXF that cuts clean.
Drop the JPG, we'll rebuild closed or single-line paths, kerf-aware, and have machine-ready DXF back in 24 hours — guaranteed.