SVG to PES starts with a clean vector.
Trace it free below to see where auto-trace breaks, then let a human deliver a stitch-aware, color-reduced vector your digitizer turns into a clean PES.
The short answer
An SVG cannot become a good PES by tracing alone: auto-trace leaves gaps that an embroidery machine can't run. We rebuild it by hand as a clean vector with stitch-aware geometry, a reduced thread palette and density notes in 24 hours, guaranteed. Your digitizer then turns that vector into the PES for your Brother, Bernina or commercial machine.
SVG is messy. An embroidery machine needs clean geometry.
SVG is great for the web and messy for production. Exported from a design tool it's packed with redundant anchor points, nested transforms, groups and strokes-as-outlines — structure a browser ignores but a cutter or press has to be untangled from first.
An embroidery machine can't run that. It needs stitch-aware geometry, reduced thread palette, density notes — the things auto-trace never produces. We rebuild the geometry by hand to satisfy every one, then deliver clean vector paths with a stitch note sheet for your digitizer.
Upload your SVG
Any image of the design plus your size and placement.
We rebuild it
A human reduces colors and marks underlay and density notes for your digitizer.
Digitizer-ready in 24h
You get clean vector paths plus a stitch note sheet, guaranteed.
Same SVG. Two very different starting points.
| For an embroidery machine | Human redraw · VectorWiz | Instant auto-trace |
|---|---|---|
| Stitchability | Built for the needle | Unstitchable detail |
| Thread colors | Reduced & matched | Hundreds of fills |
| Underlay | Proper foundation | None |
| Hoop fit | Sized to hoop | Ignores limits |
Before you run the file.
Can I convert SVG to PES for free?
Not directly. The free tracer reads PNG, JPG, HEIC and WebP, not SVG files, so you would first export the SVG to PNG. SVG from design tools is full of redundant nodes, nested transforms and groups a machine chokes on. For production a human redraw of the SVG is usually the safer route.
Why won't an auto-traced PES stitch cleanly?
Because SVG is web vector markup, and auto-trace turns that into stray nodes and broken geometry. An embroidery machine needs stitch-aware geometry, reduced thread palette, density notes. A human rebuild resolves all of it.
What do I get back?
Clean vector paths (AI, SVG, EPS) plus a stitch note sheet, built for your digitizer, with a 100% remake guarantee.
How fast is a human SVG to PES redraw?
24 hours standard, with 12-hour rush available and a 100% remake guarantee if it isn't production-correct.
Where this converter links.
Up · pillar & hub
Lateral · other converters
Get a file your digitizer can run first try.
Send the SVG, we'll rebuild it right and have production-ready vector paths back in 24 hours, guaranteed.