Convert PNG to DXF that actually cuts.
Trace it free below to see where auto-trace breaks — then let a human deliver closed-path, kerf-aware DXF your laser or router runs without errors.
The short answer
You can convert a PNG to DXF free with our instant tracer — but auto-trace leaves open paths, doubled lines and stray nodes that a cutter can't run. For laser, CNC or plasma, a human redraw delivers closed, single, kerf-aware paths in 24 hours, guaranteed to cut clean.
A PNG has no paths. A cutter needs nothing but.
A PNG stores pixels. Auto-trace guesses an outline by following the boundary between light and dark — so a slightly soft or compressed edge becomes a jagged chain of hundreds of points, and every shape is traced as a thin open outline rather than a solid closed contour.
Your laser or router can't run that. It needs closed paths (so the cut starts and ends), single lines (so it doesn't double-cut and scorch), and ideally a kerf offset sized to your beam or bit. We rebuild the geometry by hand to satisfy all three — then deliver native DXF plus SVG.
Upload your PNG
Any resolution — even a screenshot or a photo of a printed part.
We rebuild the paths
A human redraws closed, single contours and sets your kerf and tool offset.
Cut-ready DXF in 24h
You get native DXF + SVG, layered per operation, guaranteed to cut clean.
Same PNG. Two very different DXFs.
| For laser or router | Human redraw · VectorWiz | Free auto-trace |
|---|---|---|
| Path closure | Closed contours | Open outlines |
| Line doubling | Single lines | Doubled edges |
| Kerf / tool offset | Offset to your machine | None |
| Node count | Minimal, editable | Hundreds of stray points |
Before you send it to the bed.
Can I convert a PNG to DXF for free?
Yes — the instant tracer above does it free. It works for simple high-contrast shapes, but auto-trace leaves open paths and stray nodes, so production cutting usually needs a human redraw.
Why won't an auto-traced DXF cut cleanly?
Auto-trace produces open paths, doubled lines and thousands of nodes from PNG edge noise. A cutter needs closed, single, kerf-aware paths — a human rebuild resolves all three.
Do you compensate for kerf?
We deliver clean closed-path geometry and can offset for your kerf and tool diameter on request, so parts come off the bed at the intended dimension.
How fast is a human redraw?
24 hours standard, 12-hour rush available, with a 100% remake guarantee if it doesn't cut clean.
Where this converter links.
Up · pillar & hub
Lateral · other converters
Get a DXF that runs first try.
Drop the PNG, we'll rebuild closed, kerf-aware paths and have cut-ready DXF back in 24 hours — guaranteed.